Home
/
HIKVISION
/
Turbo HD DS-2AE4225T-A
/
User Manual

HIKVISION Turbo HD DS-2AE4225T-A, User Manual, Page: 31 / 48

Share

Page: 31 / 48

HIKVISION Turbo HD DS-2AE4225T-A User Manual Download Page 31

HD-TVI Speed Dome User Manual

25

You can select the preset number from the drop-down preset list in the control panel of the
encoder through a web browser, and click the arrow to call a user-defined or system-defined
preset.

5.

Clear the preset settings.
Move the cursor to CLEAR and click IRIS+ to clear the settings of the current preset.

3.4.3

Configuring Patrols

Purpose:
A patrol is a scanning track specified by a group of user-defined presets. You can call a patrol to scan
the scenes automatically among the user-defined presets in sequence.
Steps:
1.

Move the cursor to enter patrol configuration submenu:
MAIN MENU > DOME SETTINGS > PATROLS

PATROLS

PATROL NUM 1
EDIT PATROL

    PREVIEW
    CLEAR PATH
    PATRO-D                              15 S

BACK EXIT

Figure 3-13

Patrol Configuration Menu

2.

Choose the patrol number.

Steps:

(1)

Move the cursor to PATROL NUM and click IRIS+ to enter editing mode.

(2)

Click the up and down direction buttons to select the number of the patrol which is to be
configured.

(3)

Click IRIS+ again to confirm the settings and exit editing mode of this column.

Up to 10 patrols can be configured.

3.

Edit the patrol.

Steps:

(1)

Move the cursor to EDIT PATROL and click IRIS+ to enter editing mode.

«
...
29
30
31
32
33
...
»

Summary of Contents for Turbo HD DS-2AE4225T-A

















































Reviews:

No comments