LIVE DPC, WHITE DPC and BLACK DPC are adjustable in
this section.
LIVE DPC: Detects and corrects the dynamic or the
real-time defective pixels occur during the using. ON, and
OFF are selectable. The correction level from 0 to 255 is
configurable if the LIVE DPC is set as ON, set it as OFF to
disable the live defective pixel correction.
WHITE DPC: White DPC is the pixel on CCD or CMOS
sensor that appear completely white. Move the cursor to
the white DPC, and press Iris+ to enter the white DPC
configuration interface.
BLACK DPC: Black DPC is the pixel on CCD or CMOS
sensor that appear completely black. Move the cursor to
the white DPC, and press Iris+ to enter the black DPC
configuration interface.
LANGUAGE
Supports English, and Chinese.
3.8
ADJUST
In the ADJUST sub-menu, you can configure the settings,
including the sharpness, monitor, and the LSC (lens
shading compensation). Move the cursor to ADJUST
and click Iris + to enter the adjust configuration
interface.
ADJUST
SHARPNESS
MONITOR
LSC
RETURN
AUTO
OFF
RET
Figure 3-6
ADJUST
SHARPNESS
Sharpness determines the amount of detail an imaging
system can reproduce. And you can adjust the
sharpness from 0 to 15. The higher the value, the
clearer and sharper the image appears.
MONITOR
GAMMA, BLUE GAIN, and RED GAIN are selectable.
GAMMA is the name of a nonlinear operation used to
code and decode luminance or tristimulus values in
video or still image system
，
with USER, 0.45, 0.50, 0.55,
0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, and 1.00
are selectable.
BLUE GAIN can be adjusted from 0 to 100.
RED GAIN Can be adjusted from 0 to 100.
LSC
Lens shading correction corrects the phenomenon that
the image gets darkened or blurred on the periphery.
Set it as ON, move the cursor to SCAN and click Iris+ to
correct the lens shading. Set it as OFF to disable the
LSC.
3.9
EXIT
RESET
Move the cursor to RESET and click Iris+ to reset all the
settings to the default.
NOT SAVE
Move the cursor to NOT SAVE and click Iris+ to exit the
menu without saving the settings
SAVE & END
Move the cursor to SAVE & END and click Iris+ to save
the setting and exit the menu.