HIKVISION Pyronix Enforcer 64, User Manual

Page: 12 / 44

Figure 1: External Tag Reader LEDs (arming shown)
Table 2 - Internal Tag Reader LEDs
LED Description
Tag Area (present tag here)
Ready LED (ready to arm)
Alarm LED (shows alarms)
Tamper LED (shows tamper alarms)
Fault LED (shows system faults)
Unset LED (shows system is disarmed)
Access Control
The readers can also be used for opening doors only, without the ability to arm or disarm. Please
contact your installer for more information on this feature.
If the system fails to arm, a fault will display on the internal tag reader or a ‘failed to arm’ sound
will activate on the external tag reader buzzer.
Special Disarm Users
The Enforcer uses Special Disarm Users, which are users that can signal disarm and special disarm.
Special Disarm Users are programmed the same as standard users, and are numbers 15-25 in the
LEARN USER CODES KEYFOBS & TAGS? menu.
12 Enforcer User Guide 102017855 - V01