Figure 6-50
RS-232 Settings
2.
Configure the Baud Rate, Data Bit, Stop Bit, Parity, Flow Control, and Usage.
Note:
If you want to connect the camera through RS-232 port, the parameters of the RS-232 should
be exactly the same with the parameters you configured here.
3.
Click
to save the settings.
RS-485
Purpose:
The RS-485 serial port is used to control the PTZ of the camera. The configuring of the PTZ
parameters should be done before you control the PTZ unit.
Note:
RS-485 function varies depending on different speed dome models.
Steps:
1.
Enter RS-485 Port Setting interface:
Configuration>
System > System Settings > RS-485
Figure 6-51
RS-485 Settings
2.
Set the RS-485 parameters and click
to save the settings.
Note:
The Baud rate, PTZ Protocol and PTZ Address parameters of the camera should be exactly the
same as those of the control device.
Summary of Contents for PTZ Ultra Series
Page 1: ...Network Speed Dome User Manual...
Page 20: ...3 Visit the camera via the applied domain name...
Page 139: ...UD16002B...