70
User Manual of PanoVu Series Network Camera
Note:
You need a FTP server and set FTP parameters first. Refer to
Section 2.2.2 Advanced Settings -
for setting FTP parameters.
Trigger Channel
Record a video when an event occurs.
Note:
You have to set the recording schedule to realize this function. Refer to
Section 5.1 Storage
for settings the recording schedule.
Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
Note:
To trigger an alarm output when an event occurs, refer to
Section 6.1.5 Configuring Alarm
to set the alarm output parameters.
6.1.2 Configuring Video Tampering Alarm
Purpose:
You can configure the camera to trigger the alarm actions when the lens is covered.
Steps:
1. Enter the video tampering settings interface:
Configuration > Event > Basic Event > Video Tampering
Figure 6-7 Tampering Alarm
2. Check the
Enable
checkbox to enable the tampering detection.
3. Set the tampering area. Refer to
Step 4
in
Section 6.1.1 Configuring Motion Detection
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]