Before You Start
• Install client and CA certificates before configuration. Refer to Certificate Management for
detailed information.
• Select certificates according to the requirement of the log server. If two-way authentication is
required, select the CA certificate and the client certificate. If one-way authentication is
required, select the CA certificate only.
Steps
1. Check Enable Log Upload Server.
2. Optional: Check Enable Encrypted Transmission if you want the log data to be encrypted.
3. Input Log Server IP and Log Server Port.
4. Optional: Select client certificate.
5. Select CA certificate to the device.
6. Click Test to test the settings.
7. Click Save.
11.12.7 SSH
Secure Shell (SSH) is a cryptographic network protocol for operating network services over an
unsecured network.
The SSH function is disabled by default.
Caution
Use the function with caution. The security risk of device internal information leakage exists when
the function is enabled.
11.12.8 Control Timeout Settings
If this function is enabled, you will be logged out when you make no operation (not including
viewing live image) to the device via web browser within the set timeout period.
Go to Configuration → System → Security → Advanced Security to complete settings.
11.12.9 Certificate Management
It manages the server/client certificates and CA certificate of the device.
Server Certificate/Client Certificate
Note
The device has default self-signed server/client certificate installed. The certificate ID is default.
Target Capture Camera User Manual
87
Summary of Contents for PanoVu PT Series
Page 1: ...Target Capture Camera User Manual...
Page 103: ...UD20912B...
