Network PTZ Camera
·
Quick Start Guide
39
39
2.5.2
In-ceiling Mounting
Notes:
At least 250mm of height shall be reserved for in-ceiling mounting
of 4-inch IR PTZ camera.
The thickness of the ceiling must range from 5 to 40mm.
The ceiling must be strong enough to withstand more than 4
times the weight of the PTZ camera and its accessories.
Steps:
1.
Rotate the base plate counterclockwise to separate it from the PTZ
camera, as shown in the figure below.
Rotate Counterclockwise
Separate the Base Plate from the
PTZ Camera
Figure 2-43
Separate the Base Plate from the PTZ camera
2.
Attach the drill template (supplied) to the place where you want
to fix the PTZ camera, and drill a hole in the ceiling according to
the template.