Network Bullet Camera
·
Quick Start Guide
35
35
5.2
CCTV Guard Setup
Steps:
1.
Download and install the Guarding Vision app by searching “CCTV
Guard” in App Store or Google Play
TM
.
2.
Launch the app and register for a CCTV Guard user account.
3.
Log in CCTV Guard app after registration.
5.3
Adding Camera to CCTV Guard
Before you start:
You need to enable the Guarding Vision service on camera before
adding it to your CCTV Guard account. Refer to Chapter 5.1.
Steps:
1.
Use a network cable to connect the camera with a router if the
camera does not support Wi-Fi.
Figure 5-3
Connect a Router
Note:
After the camera connects to the network, please wait one minute
before any operation on the camera using CCTV Guard app.
2.
In the CCTV Guard app, tap “+” on the upper-right corner and
then scan the QR code of the camera to add the camera.
Summary of Contents for IPC-B220-IZ
Page 1: ...0 Network Bullet Camera Quick Start Guide ...
Page 39: ...0 ...
