UM IPC-4300H 040320NA
119
Figure 119, PoE Voltage and Power Measurement Interface
Connect a network cable from a PoE switch to the IP Tester’s
PSE
In
port. Connect an IP camera or other PoE node to the IP Tester’s
LAN port. The PoE voltage and the cable’s pin connection status
will show on the screen.
This test is used for measuring the voltage drawn by the
PoE node. The IP Tester must be located between the
PoE switch and the PoE node for this test to work.
The PoE switch must be connected to the
PSE In
port.
The powered device (IP camera or other PoE node) must
be connected to the LAN port.
Do not connect PoE power supply equipment (such as a
PoE switch) to the Tester’s UTP/SCAN port. Doing so will
damage the Tester.
Summary of Contents for IPC-4300H
