High Performance Event Detection Server • User Manual
14
Go to Channel Config > Scene Configuration > Scene > Illegal Parking Capture.
(Optional) check Captured Without License Plate.
Set Captured Number, Single Forensics Timeout and Matching Percentage.
Click Picture Configuration, set Capture Interval and Capture Type.
Click Save to save the settings.
Configure Traffic Event Rules
Purpose:
Configure traffic event rules to detect vehicle and collect violation evidence.
Go to Channel Config > Scene Configuration > Event.
Select Camera, Scene and Scene Mode.
Draw area.
1)
Click Draw Area.
2)
Click and drag the mouse on the view screen to draw a red rectangle, and right click to
finish drawing.
Enable event according to actual need. Checked events will be analyzed and detected.
Event Flow must be checked when detecting congestion, queue jumping and event detection.
When enable flow detection, drawed flow triggered line and lane line should be crossed.
Set event detection parameters according to actual need.
Click Save to save the settings.
Configure Lane
Purpose:
Set lane before enabling traffic data collection.
Two lane lines should be set in each lane, and up to 6 lanes can be set in a scene. No neighboring
lanes crossing are allowed.
Go to Channel Config > Scene Configuration > Lane.
Select channel.
