User Manual of Network Traffic Camera revise
31
8.7
Configuring Time
You can follow the instructions in this section to configure the time synchronization
and DST settings.
Time Settings
Steps:
1.
Go to
Configuration > Device Configuration > System Configuration> Time
.
2.
Select the time zone of your region.
3.
You can adjust time manually. Or you can enable NTP (National Time Protocol)
to synchronize time of your camera to the configured NTP server.
●
Manual Synchronization
Steps:
1)
Select
Synchronization Mode
as
Manual Synchronization
.
2)
Check
Device Time
. The grayed out device time shows the current camera
time.
3)
Click
to set the system time from the pop-up calendar.
Figure 8-8
Manual Synchronization
4)
(Optional) you can also check
Synchronize with PC
. The camera time is
synchronized with the time of your computer.
5)
Click
Save
to save the settings.
●
NTP Synchronization