Network Video Recorder User Manual
170
18.6 Restore Default Settings
Step 1
Go to Maintenance > Default.
Figure 18-12
Restore Defaults
Step 2
Select the restoring type from the following three options.
Restore Defaults: Restore all parameters, except the network (including IP address, subnet
mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account
parameters, to the factory default settings.
Factory Defaults: Restore all parameters to the factory default settings.
Restore to Inactive: Restore the device to the inactive status.
The device will reboot automatically after restoring to the default settings.
18.7 System Service
18.7.1 Network Security Settings
Disabling SADP Services
Purpose
You can disable SADP service to enhance the access security, e.g., when you are in an untrusted
network environment.
Step 1
Go to System > System Service > System Service.
Step 2
Uncheck Enable SADP to disable the service.
