4.3.12 PIR Alarm
A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector vision field.
The heat energy dissipated by a person or any other warm blooded creature such as dogs, cats,
etc., can be detected.
Steps
1. Go to System → Event → Smart Event .
2. Click PIR Alarm.
Figure 4-16 PIR Alarm
3. Select a camera to configure.
4. Check PIR Alarm.
5. Optional: Check Save VCA Picture to save the captured of PIR alarm pictures.
6. Set the arming schedule.Refer to Configure Arming Schedule .
7. Set the linkage actions. Refer to Configure Linkage Actions .
8. Click Apply.
4.3.13 Target Detection
In live view mode, the target detection function can achieve smart detection, facial detection,
vehicle detection, and human body detection during the last 5 seconds and the following 10
seconds.
Steps
1. In Live View mode, click Target Detection to enter the target detection interface.
ATM Digital Video Recorder User Manual
48
Summary of Contents for iDS-7200AHQHI-M Series
Page 1: ...ATM Digital Video Recorder User Manual...
Page 112: ...UD16604N...
