Figure 4-5 Facial Detection
3. Select a camera to configure.
4. Check Enable Face Detection.
5. Optional: Check Save VCA Picture to save the captured pictures of face detection.
6. Set the detection sensitivity. Sensitivity range: [1-5]. The higher the value is, the more easily the
face will be detected.
7. Set the arming schedule. Refer to Configure Arming Schedule
8. Set linkage actions. Refer to Configure Linkage Actions
9. Click Apply.
4.3.2 Vehicle Detection
Vehicle detection is available for road traffic monitoring. In Vehicle Detection, a passed vehicle can
be detected and the picture of its license plate can be captured. You can send an alarm signal to
notify the surveillance center and upload the captured picture to an FTP server.
Steps
1. Go to System → Event → Smart Event .
2. Select a camera to configure.
3. Click Vehicle.
ATM Digital Video Recorder User Manual
37
Summary of Contents for iDS-7200AHQHI-M Series
Page 1: ...ATM Digital Video Recorder User Manual...
Page 112: ...UD16604N...
