Network Camera User Manual
UM Network Camera 072221NA
67
Flashing Light
After enabling
Flashing Light
and setting the
Flashing Light Alarm Output
, the light flashes when an alarm
event is detected.
Set Flashing Alarm Light Output
When events occur, the flashing light on the device can be triggered as an alarm.
Steps
1.
Go to
Configuration
→
Event
→
Basic Event
→
Flashing Alarm Light Output
.
2.
Set
Flashing Duration
,
Flashing Frequency
, and
Brightness
.
•
Flashing Duration
: The time that the flashing lasts when one alarm happens.
•
Flashing Frequency
: The rate at which the light flashes. High frequency, medium frequency, low
frequency, and normally on are selectable.
•
Brightness
: The brightness of the light.
3.
Set the arming schedule. See
Set Arming Schedule
for details.
4.
Click
Save
.
NOTE:
Only certain device models support this function.
Audible Warning
After enabling
Audible Warning
and setting
Audible Alarm Output
, the built-in speaker of the device or
connected external speaker plays warning sounds when an alarm happens.
For audible alarm output settings, refer to
NOTE:
The function is only supported by certain camera models.
Set Audible Alarm Output
When the device detects targets in the detection area, audible alarm can be triggered as a warning.
Steps
1.
Go to
Configuration
→
Event
→
Basic Event
→
Audible Alarm Output
.
2.
Select
Sound Type
and set related parameters.
•
Select
Prompt
and set the alarm times you need.
•
Select
Warning
and its contents. Set the alarm times you need.
•
Select
Custom Audio
. You can select a custom audio file from the drop-down list. If no file is
available, you can click
Add
to upload an audio file that meets the requirement. Up to three audio
files can be uploaded.
Summary of Contents for IDS-2CD7A46G0-IZHSY 8-32
Page 1: ...Network Camera User Manual...
Page 90: ......