HIKVISION IDS-2CD7A46G0-IZHSY 8-32, User Manual, Page: 66 / 90

Network Camera User Manual
UM Network Camera 072221NA 66
For e-mail settings, refer to
Set Email.
Set Email
When the email is configured and Send Email is enabled as a linkage method, the device sends an e-mail
notification to all designated receivers if an alarm event is detected.
Before You Start
Set the DNS server before using the Email function. Go to
Configuration → Network → Basic Settings → TCP/IP
for DNS settings.
Steps
1. Go to the e-mail settings page: Configuration → Network → Advanced Settings → Email .
2. Set e-mail parameters.
1) Input the sender’s email information, including the
Sender’s Address
,
SMTP Server
, and
SMTP Port
.
2) Optional: If your e-mail server requires authentication, check Authentication and input your user
name and password to log in to the server.
3) Set the E-mail Encryption .
●
When you select SSL or TLS and disable STARTTLS, e-mails are sent after being encrypted by
SSL or TLS. The SMTP port should be set as 465.
●
When you select SSL or TLS and Enable STARTTLS , e-mails are sent after being encrypted by
STARTTLS. The SMTP port should be set as 25.
NOTE: To use STARTTLS, make sure that the protocol is supported by your e-mail server. If
you check
Enable STARTTLS
and the protocol is not supported by your e-mail server,
your e-mail is sent with no encryption.
4) Optional: If you want to receive notification with alarm pictures, check Attached Image . The
notification e-mail has three attached alarm pictures about the event with configurable image
capturing interval.
5) Input the receiver’s information, including the receiver’s name and address.
6) Click Test to see if the function is properly configured.
3. Click
Save
.
Notify Surveillance Center
Check Notify Surveillance Center , and the alarm information is uploaded to the surveillance center when an
alarm event is detected.
Trigger Recording
Check
Trigger Recording
, and the device records the video about the detected alarm event. For recording
settings, refer to
Video Recording and Picture Capture.