iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA
94
Face Counting Algorithm Parameters
It is used to set and optimize the parameters of the algorithm parameters for Face Counting.
These functions vary according to different models.
•
Face Capture Mode:
Current algorithm version, which cannot be edited.
•
Best Shot:
The best shot after the target leaves the detection area.
•
Capture Times:
Capture times a face will be captured during its stay in the configured area. The
default value is 1.
•
Capture Threshold:
Quality of face to trigger capture and alarm. Higher value means better quality
should be met to trigger capture and alarm.
•
Face Exposure:
The device adjusts the face brightness when it detects face in the image.
•
Reference Brightness:
The reference brightness of a face in the face exposure mode. If a face is
detected, the camera adjusts the face brightness according to the value you set. The higher the
value, the brighter the face.
•
Min. Duration:
The minimum duration the camera exposes the face.
If face exposure is enabled, make sure WDR is disabled and manual iris is selected.
•
Real-Time Update Data:
After enabled, the real-time people counting data will be uploaded to the
platform.
•
Data Statistics Cycle:
Select the data statistics cycle as required.
•
Algorithm Validity:
The higher the value, the more difficult it is to detect the target, but the higher
the detection accuracy.
•
Restore Defaults:
Click Restore to restore all the settings in advanced configuration to the factory
defaults.
View Face Counting Result
Steps
1.
Go to
Application
.
2.
Set search condition and click
Counting
. Matched results are shown in
Face Picture Comparison
Statistics
and
People Counting Statistics
area.
Queue Management
Use to count queuing-up people number and waiting time of each person.
Queue management is supported only by certain models.