HIKVISION HWN-2104H-4P User Manual Download Page 184

Page: 184 / 227

Network Video Recorder User Manual

183

Managing HDD Group

Setting HDD Groups

Purpose:

Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a
particular HDD group through HDD settings.

Enter the Storage Mode interface.

Menu > HDD > Advanced > Storage Mode

Set the

Mode

to Group, as shown in Figure 12-13.

Storage Mode Interface

Click the

Apply

button and the following Attention box will pop up.

Attention for Reboot

Click the

Yes

button to reboot the device to activate the changes.

After reboot of device, enter the HDD Information interface.

Menu > HDD> General

Select HDD from the list and click

icon to enter the Local HDD Settings interface, as

shown in Figure 12-15.

Local HDD Settings Interface

Summary of Contents for HWN-2104H-4P




































































































































































































































Search results

Summary of Contents for HWN-2104H-4P

Reviews:

Related manuals for HWN-2104H-4P

Brands by name

Popular brands

HIKVISION HWN-2104H-4P, User Manual

Search results

Summary of Contents for HWN-2104H-4P

Reviews:

Related manuals for HWN-2104H-4P

Brands by name

Popular brands