HIKVISION HiWatch HWI-B120H-U User Manual Download Page 44

Page: 44 / 193

Network Camera User Manual

Note:



VCA Resource function varies according to different camera models.



VCA options are mutually exclusive.



The function may not be supported by some camera models.

Operating PTZ Control

Purpose:

In the live view interface, you can use the PTZ control buttons to realize pan/tilt/zoom

control of the camera.

Note:

To realize PTZ control, the camera connected to the network must support the

PTZ function or have a pan/tilt unit installed to the camera. Please properly set the

PTZ parameters on RS485 settings page referring to

Section 6.2.4 RS485 Settings.

5.5.1

PTZ Control Panel

On the live view page, click next to the right side of the live view window to show

the PTZ control panel and click to hide it.

Click the direction buttons to control the pan/tilt movements.

PTZ Control Panel

Click the zoom/focus/iris buttons to realize lens control.

Notes:



There are eight direction arrows ( , ,

) in the control

panel. Click the arrows to realize adjustment in the relative positions.

Summary of Contents for HiWatch HWI-B120H-U


































































































































































































Search results

Summary of Contents for HiWatch HWI-B120H-U

Reviews:

Related manuals for HiWatch HWI-B120H-U

Brands by name

Popular brands

HIKVISION HiWatch HWI-B120H-U, User Manual

Search results

Summary of Contents for HiWatch HWI-B120H-U

Reviews:

Related manuals for HiWatch HWI-B120H-U

Brands by name

Popular brands