Network Bullet Camera
·
Quick Start Guide
17
2
Installation
Before you start:
●
Make sure the device in the package is in good condition and all
the assembly parts are included.
●
The standard power supply is PoE or 12 VDC, please make sure
your power supply matches with your camera.
●
Make sure all the related equipment is power-off during the
installation.
●
Check the specification of the products for the installation
environment.
●
Make sure that the wall is strong enough to withstand four
times the weight of the camera and the bracket.
●
Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.
Memory Card Installation
Only type V camera supports memory card installation, you can
follow the steps to mount and unmount the memory card.
Steps:
1.
Loosen the screws to remove the memory card slot cover.
Summary of Contents for HiLook
Page 1: ...0 Quick Start Guide Network Bullet Camera...
Page 28: ...0 UD18031B C...