HIKVISION Hilook T6 Series, Quick Start Manual, Page: 12 / 43

Network Turret Camera
·
Quick Start Guide
11
2 Installation
Before you start:
● Make sure the device in the package is in good condition and all
the assembly parts are included.
● The standard power supply is 12 VDC, please make sure your
power supply matches with your camera.
● Make sure all the related equipment is power-off during the
installation.
● Check the specification of the products for the installation
environment.
● Make sure that the wall is strong enough to withstand four
times the weight of the camera and the bracket.
● Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.
(Optional) Install the Memory Card
Only certain models support memory card installation. Here take
type II as an example to describe the steps.
Steps:
1. Rotate the camera body to completely expose the memory card
slot.