HIKVISION HiLook IPC-T221H Quick Start Manual Download Page 5

Network Turret Camera

·

Quick Start Guide

 

 

1. This device may not cause harmful interference. 

2. This device must accept any interference received, including 
interference that may cause undesired operation. 

EU Conformity Statement 

This product and - if applicable - the supplied 
accessories too are marked with "CE" and comply 
therefore with the applicable harmonized European 

standards listed under the EMC Directive 2014/30/EU, the RoHS 
Directive 2011/65/EU. 

2012/19/EU (WEEE directive): Products marked 
with this symbol cannot be disposed of as unsorted 
municipal waste in the European Union. For proper 
recycling, return this product to your local supplier 

upon the purchase of equivalent new equipment, or dispose of it at 
designated collection points. For more information see: 
www.recyclethis.info 

2006/66/EC (battery directive): This product 
contains a battery that cannot be disposed of as 
unsorted municipal waste in the European Union. 
See the product documentation for specific battery 
information. The battery is marked with this symbol, 

which may include lettering to indicate cadmium (Cd), lead (Pb), or 
mercury (Hg). For proper recycling, return the battery to your 
supplier or to a designated collection point. For more information 
see

www.recyclethis.info 

Industry Canada ICES-003 Compliance 

Summary of Contents for HiLook IPC-T221H





























Reviews: