Network Bullet Camera
·
Quick Start Guide
8
●
Please make sure that the plug is firmly connected to the power
socket.
●
If smoke, odor or noise rise from the device, turn off the power
at once and unplug the power cable, and then please contact
the service center.
●
If the POE ports of device do not comply with Limited Power
Source, the additional equipment connected to POE ports shall
have fire enclosure.
●
The USB interface of the /P devices can be connected with the
mouse and U-flash disk storage device only.
Cautions
For Network Camera:
●
Make sure the power supply voltage is correct before using the
camera.
●
Do not drop the camera or subject it to physical shock.
●
Do not touch sensor modules with fingers. If cleaning is
necessary, use clean cloth with a bit of ethanol and wipe it
gently. If the camera will not be used for an extended period,
please replace the lens cap to protect the sensor from dirt.
●
Do not aim the camera at the sun or extra bright places.
Blooming or smearing may occur otherwise (which is not a
malfunction), and affect the endurance of sensor at the same
time.