6.4 Add Event Code of Security Control Device
The ARC recognizes security control device's events by event codes. The Hik IP Receiver Pro will
receive an original code when a security control device added to the Hik IP Receiver Pro triggers an
event. Then, the Hik IP Receiver Pro transfers the original code to a target code (a CID code or a SIA
code) which could be recognized by the ARC. After that, the Hik IP Receiver Pro sends the target
code to the ARC. In this way, you can receive event notifications by the ARC.
On the Automation Output page, click Event Code to enter the Security Control Device page.
●
Click Add to enter the event name, original code, CID code or SIA code, and click Add.
●
Click to delete an event. You can select multiple events, and click Delete to batch delete them.
Note
Only the events added by yourself are supported to be deleted.
●
Click , and edit Event Name, CID Code or SIA Code.
Note
The Hik IP Receiver Pro will send the original code to the ARC without trans-coding and the ARC
will not receive an event notification if you delete an event in this event list.
6.5 Edit Encoding Device Event and Device Status Event
You can edit the information of encoding device event and device status event to keep it the same
with the information configured on the ARC.
Note
The CID code and SIA code should be the same with those configured on the ARC.
On the Automation Output page, click Event Code to enter the Event page.
On the Encoding Device page and Device Status page, select an event type and click to edit the
event's CID code, SIA code, and event name.
You can also check Enable Restore Event, and edit the Event Interval, CID Code, SIA Code, and
Description.
Click OK to save the settings.
Hik IP Receiver Pro User Manual
40
Summary of Contents for Hik IP Receiver Pro
Page 1: ...Hik IP Receiver Pro User Manual...
Page 57: ...UD28166B...
