HIKVISION EPI-4225I-DE, Quick Start Manual, Page: 14 / 24

QSG EPI-4225I-DE 030518NA 14
Figure 2-10 Install the Trim Ring
7. Remove the protective film on the bubble after the installation is finished.
3 Speed Dome LAN Configuration
Notes:
 The use of products with internet access carries inherent security risks. In order to
avoid network attacks and information leakage, strengthen your own network
protection.
If the product does not work properly, contact your dealer or the nearest
service center for help.
 To ensure the network security of the speed dome, we recommend timely
assessments and periodic maintenance. Contact us for more information.
3.1 Wiring
To view and configure the speed dome via a LAN (Local Area Network), you need to
connect the network speed dome to the same subnet as your PC. Install the SADP or
client software to search and change the IP address of the network speed dome.
Connect the speed dome to the network according, as follows.
Figure 3-1 Connecting Directly