HIKVISION DS-TMC403-E, Manual, Page: 1 / 12

How to Configure DS-TMC403-E
1. Installation
Installation Standard

Choose a horizontal installation floor

Pre-embedded cables, the conduit should be 50 mm above the ground to prevent
water from entering the cable and causing a short circuit

When installing against a wall, at least 200mm of space should be reserved between
the back cover and the wall to facilitate wiring and other operations

When installing this device, the fuselage needs to be turned sideways to align with
the capture position;
(1) Capture Distance

The capture position is 3.5-5m away from the capture unit
2. Fixed Base
The camera needs to be fixed to the mounting surface with expansion screws.
(1) According to the general direction of the all-in-one chassis on the safety island,
punch 3 holes in the safety island, as shown in the figure below