How to Configure DS-TMC403-E
1.
Installation
Installation Standard
Choose a horizontal installation floor
Pre-embedded cables, the conduit should be 50 mm above the ground to prevent
water from entering the cable and causing a short circuit
When installing against a wall, at least 200mm of space should be reserved between
the back cover and the wall to facilitate wiring and other operations
When installing this device, the fuselage needs to be turned sideways to align with
the capture position;
(1)
Capture Distance
The capture position is 3.5-5m away from the capture unit
2.
Fixed Base
The camera needs to be fixed to the mounting surface with expansion screws.
(1) According to the general direction of the all-in-one chassis on the safety island,
punch 3 holes in the safety island, as shown in the figure below
Summary of Contents for DS-TMC403-E
Page 6: ......
