Security Control Panel Operation Command
5
Function
Operation
Key
Note
Testing
Walking testing
[Password][*] [6]
[0][#]
Exiting walking testing
[Password][*] [6]
[2][#]
Signal strength testing
[Password][*] [6]
[3][#]
Exiting signal strength
testing
[Password][*] [6]
[4][#]
Panic alarm
Panic
[Panic]
Press at least 3 s
Fire alarm
Fire alarm
[Fire]
Press at least 3 s
Relay
Selected relay open
[Password][*][8][5][n]
[n][n][#]
Selected relay close
[Password][*][8][6][n]
[n][n][#]
Equipment status
query
System fault status
[status]
Used for system fault
query
Wireless device
enrollment/removal
Wireless device
enrollment/removal
[Password][Project][O
peration][Device
Type][RS-485
Address][#]
Note: No
corresponding digits
can be omitted in all
fields.
Operation mode: 1
represents
enrollment, and 2
represents removal
(not supported).
1 bit.
Device type: 01
represents the
remote controller (not
supported); 02
represents the
detector or single
zone module; 03
represents the
repeater; 04
represents the output
module; and 05