Video Intercom Villa Door Station User Manual
35
Figure 5-17 Door Parameters
2. Select the door and edit the door name.
3. Set door contact status.
4. Set lock action time.
5. Click Save to enable the settings.
Card Security
Go to Access Control → Card Security to enter the settings page.
Slide to enable card encryption parameters and CPU card reading content. Click Save to enable the
settings.
Elevator Control
Before You Start
●
Make sure your door station is in the mode of main door station. Only the main door station
support elevator control function.
●
Make sure your door station has been connected to the elevator controller via RS-485 wire if
you want to use RS-485 interface.
Steps
1. Click Access Control → Elevator Control to enter the corresponding configuration page.
Summary of Contents for DS-KIS603-P
Page 1: ...Video Intercom Villa Door Station User Manual...
Page 60: ...UD20205B...
