HIKVISION DS-KAD1040, User Manual, Page: 59 / 80

4. Remove the plastic sheets on the side of the gang boxes (shown as 1 and 2)
below:
Figure 4-60 Remove the Plastic Sheets
5. Mark the gang box screw holes on the wall.
1) Route the cables through the gang box hole.
2) Insert the gang box into the installation hole.
3) Mark the gang box screw holes' position with a marker, and take out the gang
box.
Figure 4-61 Mark the Screw Holes
Video Intercom Two-Wire Bundle User Manual
48