HIKVISION DS-K5671-3XF Series, User Manual

Page: 68 / 154

Parameter Description
Note
●
Biometric recognition products are not 100% applicable to
anti-spoofing environments. If you require a higher security
level, use multiple authentication modes.
●
If you adopt multiple authentication modes, you should
authenticate other methods before authenticating face.
Reader Auth. Mode (Card
Reader Authentication Mode)
Select the card reader's authentication mode.
Enable NFC Card Enable the function and you can present the NFC card to
authenticate.
Door Contact You can select "Open (Remain Open)" or "Close (Remian
Closed)" according to your actual needs. By default, it is Close
(Remian Closed).
Open Duration Set the door unlocking duration. If the door is not opened for
the set time, the door will be locked. Available door locked time
range: 1 to 255s.
Authentication Interval Set the device authenticating interval. Available authentication
interval range: 0 to 65535.
7.10 Time and Attendance Status Settings
You can set the attendance mode as check in, check out, break out, break in, overtime in, and
overtime out according to your actual situation.
Note
The function should be used cooperatively with time and attendance function on the client
software.
7.10.1 Disable Attendance Mode via Device
Disable the attendance mode and the system will not display the attendance status on the initial
page.
Tap T&A Status to enter the T&A Status page.
DS-K5671-3XF Series Face Recognition Terminal User Manual
54