HIKVISION DS-K5671-3XF Series, User Manual

Page: 36 / 154

Note
●
You can also change the settings in System Settings.
●
If you install the device indoors near the window or the face recognition function is not
working well, select Others.
●
If you do not configure the application mode and tap Next, the system will select Indoor by
default.
●
If you activate the device via other tools remotely, the system will select Indoor as the
application mode by default.
6.3 Set Network Parameters
After activation and select application mode, you can set the network for the device
Steps
1. When you enter the Select Network page, tap Wired Network or Wi-Fi for your actual needs.
DS-K5671-3XF Series Face Recognition Terminal User Manual
22