1. Prepare for the installation tools, check the components, and prepare for the installation base.
2. Draw a central line on the installation surface of the left or right pedestal.
3. Draw other parallel lines for installing the other pedestals.
Note
The distance between the nearest two line is L+200 mm. L represents the lane width.
4. Drill holes on the ground according to the installation holes on the pedestals and insert the
expansion sleeves.
5. Seal the bottom of the turnstile to avoid water from entering.
Note
Make sure the installation holes on the pedestals and the base are aligned with each other.
6. Secure the pedestals with expansion bolts.
Note
• Do not immerse the pedestal in the water. In special circumstances, the immersed height
should be no more than 690 mm.
• The installation footprint is as follows:
Figure 2-3 Installation Footprint
DS-K3G501 Series Tripod Turnstile Quick Start Guide
5