If the device has been connected to Hik-Connect and network, when there is a new installation
package in Hik-Connect, you can click Upgrade after Online Update to upgrade the device system.
Select an upgrade type from the drop-down list. Click and select the upgrade file from your
local PC. Click Upgrade to start upgrading.
Note
Do not power off during the upgrading.
8.5.7 Log Query
You can search and view the device logs.
Go to Configuration → System → Maintenance → Log Query .
Set the major and minor type of the log type. Set the start time and end time for searching, and
click Search.
The results will be displayed below, which including the No., time, the major type the minor type,
the channel No., the local/remote user information, the remote host IP, etc.
8.5.8 Security Mode Settings
Set the security mode for logging in the client software.
On the Device for Management page, click Configuration → System → Security → Security
Service .
Select a security mode from the drop-down list, and click Save.
Security Mode
High security level for user information verification when logging in the client software.
Compatible Mode
The user information verification is compatible with the old client software version when
logging in.
Enable SSH
To raise network security, disable SSH service. The configuration is only used to debug the
device for the professionals.
Enable HTTPS
In order to increase the network security level when visiting websites, you can enable HTTPS to
acquire a more secure and encrypted network communication environment. The
communication should authenticated by identity and encryption password after enabling
HTTPS, which is save.
DS-K1TA70 Series Face Recognition Terminal User Manual
75
