Main Channel
The device will communicate with the center via the main channel.
Note
N1 refers to wired network.
9.14.9 Network Center Parameters Settings
You can set the notify center, center's IP address, the port No., the protocol (EHome), the EHome
account user name,etc. to transmit data via EHome protocol.
On the Device for Management page, click → Network → Network Center Parameters to enter
the Network Center Parameters Settings tab.
Select a center from the drop-down list.
After enabling the function, you can set the center's address type, IP address/domain name, port
No., EHome user name, etc.
Click Save.
9.14.10 Configure SIP Parameters
Set the main station's IP address and the SIP server's IP address. After setting the parameters, you
can communicate among the access control device, door station, indoor station, main station, and
the platform.
Note
Only the access control device and other devices or systems (such as door station, indoor station,
main station, platform) are in the same IP segment, the two-way audio can be performed.
Click Maintenance and Management → Device to enter the device list.
Click to enter the remote configuration page.
Click Network → Linked Network Configuration and set the main station's IP address and SIP
server's IP address.
Click Save.
9.14.11 Set Relay Parameters
Click Maintenance and Management → Device to enter the device list.
Click to enter the remote configuration page.
Click Alarm → Relay . Select a relay and click and set the relay name and output delay time.
Click OK to save the settings.
DS-K1TA70 Series Face Recognition Terminal User Manual
200
