-
Place the card on the card enrollment station or card reader and click Read to get the card
number. The card number will display in the Card No. field automatically.
Note
You need to click Settings to set the card issuing mode and related parameters first. For
details, refer to Set Card Issuing Parameters .
5. Select the card type according to actual needs.
Normal Card
The card is used for opening doors for normal usage.
Duress Card
When the person is under duress, he/she can swipe the duress card to open the door. The
door will be unlocked and the client will receive a duress event to notify the security
personnel.
Patrol Card
This card is used for the inspection staff to check the their attendance of inspection. By
swiping the card on the specified card reader, the person is marked as on duty of inspection
at that time.
Dismiss Card
By swiping the card on the card reader, it can stop the buzzing of the card reader.
6. Click Add.
The card will be issued to the person.
7. Confirm to add the person.
-
Click Add to add the person and close the Add Person window.
-
Click Add and New to add the person and continue to add other persons.
9.4.4 Upload a Face Photo from Local PC
When adding person, you can upload a face photo stored in local PC to the client as the person's
profile.
Steps
1. Enter Person module.
2. Select an organization in the organization list to add the person and click Add.
Note
Enter the person's basic information first. For details about configuring person's basic
information, refer to Configure Basic Information .
3. Click Add Face in the Basic Information panel.
4. Select Upload.
5. Select a picture from the PC running the client.
DS-K1TA70 Series Face Recognition Terminal User Manual
118
