record from client software to the third-party database
automatically.
Steps
1. Enter Time & Attendance module.
2. Click Attendance Settings → Third-Party Database .
3. Set Apply to Database switch to on to enable synchronization
function.
4. Set the required parameters of the third-party database,
including database type, server IP address, database name,
user name and password.
5. Set table parameters of database according to the actual
configurations.
1) Enter the table name of the third-party database.
2) Set the mapped table fields between the client software and
the third-party database.
6. Click Connection Test to test whether database can be
connected.
7. Click Save to test whether database can be connected and save
the settings for the successful connection.
The attendance data will be written to the third-party
database.
Configure Break Time
You can add break time and set start time, end time, duration,
calculation mode and other parameters for the break. The added
break time can also be edited or deleted.
Steps
1. Click Time & Attendance → Timetable .
The added timetables are displayed in the list.
2. Select an added timetable or click Add to enter setting
timetable page.
3. Click Settings in the break time area to enter break time
management page.
4. Add break time.
1) Click Add.
2) Enter a name for the break time.
3) Set related parameters for the break time.
Start Time / End Time
Set the time when the break starts and ends.
No Earlier Than / No Later Than
Set the earliest swiping time for starting break and the
latest swiping time for ending break.
Break Duration
The duration from start time to end time of the break.
Calculation
Auto Deduct
The fixed break duration will be excluded from work
hours.
Must Check
104
