The added first person(s) will list in the First Person List
6. Optional: Select a first person from the list and click Delete to
remove the person from the first person list.
7. Click Save.
9.4.7 Configure Anti-Passback
You can set to only pass the access control point according to the
specified path and only one person could pass the access control
point after swiping the card.
Before You Start
Enable the anti-passing back function of the access control
device.
Perform this task when you want to configure the anti-passing
back for the access control device.
Steps
Note
Either the anti-passing back or multi-door interlocking function
can be configured for an access control device at the same time.
For the configuration of multi-door interlocking, refer to
Configure Multi-door Interlocking.
1. Click Access Control Advanced Function Anti-Passback to enter
the Anti-Passpack Settings page.
2. Select an access control device on the left panel.
3. Select a card reader as the beginning of the path in the First
Card Reader field.
4. Click of the selected first card reader in the Card Reader
Afterward column to open the select card reader dialog.
5. Select the afterward card readers for the first card reader.
Note
Up to four afterward card readers can be added as afterward
card readers for one card reader.
6. Click OK in the dialog to save the selections.
7. Click Save in the Anti-Passback Settings page to save the
settings and take effect.
Example
Set Card Swiping Path
If you select Reader In_01 as the beginning, and select Reader
In_02, Reader Out_04 as the linked card readers. Then you can
only get through the access control point by swiping the card in
the order as Reader In_01, Reader In_02 and Reader Out_04.
9.4.8 Configure Multi-door Interlocking
You can set the multi-door interlocking between multiple doors of
the same access control device. To open one of the doors, other
doors must keep closed. That means in the interlocking combined
door group, up to one door can be opened at the same time.
Perform this task when you want to realize interlocking between
multiple doors.
63
Summary of Contents for DS-K1T605 Series
Page 1: ...Face Recognition Terminal UD07930B E...
Page 104: ...95...
Page 105: ...C Relationship between Device Height Person Height and Standing Distance 96...
Page 107: ...E Dimension 98...
