All the added persons with no card issued will display.
3. Set the card issuing parameters. For details, refer to Set Card
4. Click Initialize to initialize the card enrollment station or card
reader to make it ready for issuing cards.
5. Click the card number column and enter the card number.
-
Place the card on the card enrollment station.
-
Swipe the card on the card reader.
-
Enter the card number manually and press Enter key on your
keyboard.
The card number will be read automatically and the card will
be issued to the person in the list.
6. Repeat the above step to issue the cards to the persons in the
list in sequence.
9.1.21 Report Card Loss
If the person lost his/her card, you can report the card loss so
that the card's related access authorization will be inactive.
Steps
1. Enter Person module.
2. Select the person you want to report card loss for and click Edit
to open the Edit Person window.
3. In the Credential Card panel, click on the added card to set
this card as lost card.
After reporting card loss, the access authorization of this card
will be invalid and inactive. Other person who gets this card
cannot access the doors by swiping this lost card.
4. Optional: If the lost card is found, you can click to cancel the
loss.
After cancelling card loss, the access authorization of the
person will be valid and active.
5. If the lost card is added in one access group and the access
group is applied to the device already, after reporting card loss
or cancelling card loss, a window will pop up to notify you to
apply the changes to the device. After applying to device, these
changes can take effect on the device.
9.1.22 Set Card Issuing Parameters
The client provides two modes for reading a card's number: via
card enrollment station or via the card reader of the access
control device. If a card enrollment station is available, connect it
to the PC running the client by USB interface or COM, and place
the card on the card enrollment to read the card number. If not,
you can also swipe the card on the card reader of the added
access control device to get the card number. As a result, before
issuing a card to one person, you need to set the card issuing
parameters including the issuing mode and related parameters.
When adding a card to one person, click Settings to open the Card
Issuing Settings window.
Local Mode: Issue Card by Card Enrollment Station
Connect a card enrollment station to the PC running the client.
You can place the card on the card enrollment station to get the
card number.
45
Summary of Contents for DS-K1T605 Series
Page 1: ...Face Recognition Terminal UD07930B E...
Page 104: ...95...
Page 105: ...C Relationship between Device Height Person Height and Standing Distance 96...
Page 107: ...E Dimension 98...
