3
Chapter 3
Wiring and Installation
3.1
Terminal Description
The description of 10 cables is shown below.
Table 3-1
Description of Cable
Color
Description
Color
VCC
PWR (12V DC)
Red
GND
GND
Gray
WG_BEEP
Beep Control (available for Wiegand
Protocol)
Gray
WG_OK
OK (available for Wiegand Protocol)
Gray
WG_ERR
Error (available for Wiegand Protocol)
Gray
WG_D0
Wiegand W0 (available for Wiegand
Protocol)
Gray
WG_D1
Wiegand W1 (available for Wiegand
Protocol)
Gray
WIG_26/34
Private Wiegand 26 / 34 selection
Gray
3.2
Wiring Cables
Purpose:
Wire the cables between controller and card reader, thus to
establish the communication between them.
Steps for Wiegand communication mode:
Wiring the cable between controller and card reader as shown
below.
