Title:
DS-K1200 Series Card Readers Connect
to DS-K2600 Series Access Controllers
Version:
v1.0
Date:
6/21/2017
Product:
Access Control Device
Page:
2 of 3
For example, the binary value of the above status is 0011.
Step 1: DIP Switch
Please set the DIP switch firstly before connecting the card reader, more details about the binary value of
the card reader by setting DIP Switch to correspond with the door, please check the table below:
DIP Switch Status
Door
Reader
1000
Door 1
Entrance Reader 1
0100
Eixt Reader 2
1100
Door 2
Entrance Reader 3
0010
Eixt Reader 4
1010
Door 3
Entrance Reader 5
0110
Eixt Reader 6
1110
Door 4
Entrance Reader 7
0001
Eixt Reader 8
Step 2: RS-485 Wiring
Please connect card reader to door station as following picture:
Note
1.
Actually you can find RS485 A/B/C/D interfaces in access controller; we extend RS485 A interface
to the wiring distribution for easier cable connection and we use RS485B interface for backup, the
cable connection as following picture:
2.
About wiring materials, we suggest customer choose RVVP cable.
RS485-
RS485+
Power GND
+12V
RS485 GND
RS485 A+
RS485 A-
RS485 B+
RS485 B-
