8
Use AP Mode for Wi-Fi Configuration
-For AP hotspot configuration, press the
Reset
button for 5 seconds, and then you will hear a voice prompt.
-Wait for a few seconds, until you see the LED indicator flashing blue.
-Follow the voice prompt to connect Wi-Fi.
Wi-Fi Name: softap_XXXXXXXXX (9-digit Serial No.)
Default Password: softap_XXXXXX (Verification Code)
eg. Default Password: softap_ABCDEF
Serial No. and verification code are listed on the cover of this manual.
-Go back to the Hik-Connect app after successful connection. Tap
Next
.
-Search out the Wi-Fi you want the device to connect to, and enter password.
SD Card Management
1.
1. In the Hik-Connect app, tap the
In the Hik-Connect app, tap the
Storage Status
Storage Status
in the Device Settings interface to check the SD card status.
in the Device Settings interface to check the SD card status.
2.
2. If the card status displays as
If the card status displays as
Uninitialized
Uninitialized
, tap to initialize it.
, tap to initialize it.
The status will then change to
The status will then change to
Normal
Normal
, and it can store videos and/or pictures.
, and it can store videos and/or pictures.