- 12 -
Figure 3-3 Connecting the console port of ROUTE SWITCH and computer
Table 3-1 Pins of the console port
No.
Name
Remarks
1
RXD
Input
2
No connect
3
SG
GND
4
No connect
5
TXD
Output
Note:
The console port of the ROUTE SWITCH switch does not support traffic control. Therefore,
you must set the option data traffic control to none when you configure the switch with the super
terminal. Otherwise, the single-pass problem will arise on the super terminal.
The cable is used to connect the console port of the ROUTE SWITCH switch and the outside
console terminal device. One end of the console port is the mini USB plug and the other end
of the console port is a 9-hole plug. The Mini USB plug is put into the socket of the console
port on the ROUTE SWITCH switch. The inner-connection of the cable is shown below. The
serial number of this cable is RLC8501.