HIKVISION DS-96000NI-I16/H Series User Manual Download

Page: 89 / 188

Network Video Recorder User Manual

Chapter 9 File Management

Search and Export All Files

Search Files

Purpose

Specify detailed conditions to search videos and pictures.

Go to File Management > All Files.

Specify detailed conditions, including time, camera, event type, etc.

Search All Files

Click Search to display results. The matched files will be displayed.

Export Files

Purpose

Export files for backup purposes using USB device (USB flash drive, USB HDD, USB optical disc
drive), SATA optical disc drive or eSATA HDD.

Search files to export. For details, see 9.1.1 Search Files.

Click to select files and click Export.

Select the file to export as Video and Log and click OK.

Click OK to export files to backup device.

Summary of Contents for DS-96000NI-I16/H Series





























































































































































































Search results

Summary of Contents for DS-96000NI-I16/H Series

Reviews:

Related manuals for DS-96000NI-I16/H Series

Brands by name

Popular brands

HIKVISION DS-96000NI-I16/H Series, User Manual

Search results

Summary of Contents for DS-96000NI-I16/H Series

Reviews:

Related manuals for DS-96000NI-I16/H Series

Brands by name

Popular brands