www.hikvision.com/en/us
Networking a DVR/NVR requires 3 steps:
1. Assign an
IP address, Default Gateway, Subnet Mask, and a DNS server (Please
note: DNS, not DDNS)
to the DVR/NVR
2. Forward the appropriate ports on the router
(Port Forwarding)
.
3. Register
DDNS
(DDNS registration is required only if the public IP address is Dynamic).
To assigning an
IP ADDRESS
, go to
“MENU”>”SYSTEM CONFIGURATION”>”NETWORK”
6. SETTING UP THE NETWORK
ACCESS
General
IP CONFIGURATION
Note that the DVR/NVR has a default IP Address set to
192.0.0.64
Enable
DHCP
With DHCP
enabled, the
router will
assign an IP
address to
the
DVR/NVR
Select NIC
Working
Mode
Default
Route
