manualshive.com logo in svg

HIKVISION DS-7600NI-K1/4G Series, User Manual

Share
Download
HIKVISION DS-7600NI-K1/4G Series User Manual Download Page 77

Figure 6-17 Alarm Input

Note

Local alarm input: Local alarm input is triggered by the external device that connected to the

video recorder's terminal block.

2. Click   of a desired alarm input.

Figure 6-18 Edit Alarm Input

3. Customize Alarm Name.

4. Set alarm type as N.O (normally open) or N.C (normally closed).

5. Set Settings as Input to enable the function.

Note

If you set Settings as Nonuse, the alarm input will be disabled. If you set Settings as One-Key

Disarmig, the selected linkage method(s) of the alarm input will be disabled.

6. Set the arming schedule. Refer to Configure Arming Schedule for details.

7. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.

8. Click Apply.

Alarm Output

Trigger an alarm output when an alarm is triggered.
Steps

1. Go to Configuration → Event → Normal Event → Alarm Output .

Figure 6-19 Alarm Output

2. Click   of a desired alarm output.

3. Customize Alarm Name.

4. Select Dwell Time.

Network Video Recorder User Manual

64

Summary of Contents for DS-7600NI-K1/4G Series

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands