HIKVISION DS-7600NI-I2 Series User Manual Download Page 91

Page: 91 / 324

Network Video Recorder User Manual

Step 3

There are 3 one-touch park types selectable, click the corresponding button to activate the
park action.

Park (Quick Patrol):

The dome starts patrol from the predefined preset 1 to preset 32 in

order after the park time. The undefined preset will be skipped.

Park (Patrol 1):

The dome starts move according to the predefined patrol 1 path after the

park time.

Park (Preset 1):

The dome moves to the predefined preset 1 location after the park time.

The park time can only be set through the speed dome configuration interface, by default the
value is 5s.

Step 4

Click the button again to inactivate it.

Summary of Contents for DS-7600NI-I2 Series





































































































































































































































































































































Search results

Summary of Contents for DS-7600NI-I2 Series

Reviews:

HIKVISION DS-7600NI-I2 Series, User Manual, Page: 91 / 324

Search results

Summary of Contents for DS-7600NI-I2 Series

Reviews: