HIKVISION DS-7300HFI-ST Series User Manual Download Page 22

Page: 22 / 84

User’s Manual of DS-7300HFI-ST Series DVR

Checking the Status of Your DVR

The current status of your DVR can be checked at anytime by going to the Status menu. The Status menu,
shown in Figure 11 can be accessed by going to Main Menu > Status.

Figure 11 Status Menu

The items that are found on the Status menu include:

•

Model:

The model number of the DVR.

•

Firmware Version:

The current firmware version installed on the DVR.

•

Encoder Version:

The current encoder version installed on the DVR.

•

System Time:

The current system time.

•

Total Disk Space:

Total disk space of the DVR.

•

Free Disk Space:

Total free disk space of the DVR.

•

Uptime:

The amount of time the DVR has been up and running.

•

Messages:

Displays the overall system status.

•

IPv4 Address:

The IPv4 address that is set for the DVR.

•

IPv4 Subnet Mask:

The IPv4 Subnet mask that is used for the DVR.

•

IPv4 Default Gateway:

The IPv4 default gateway that is set on the DVR.

•

DNS Server:

The DNS server that’s currently being used on the DVR.

•

DVR Domain Name:

The DVR domain name that is set for the DVR.

•

Client/HTTP Port:

The current ports being used for client and web access.

•

Multicast Address:

The multicast address that’s being used on the DVR.

•

Camera Status:

The recording status of the attached cameras. A blue circle denotes that the

camera is recording while a gray circle shows that it is not.

Summary of Contents for DS-7300HFI-ST Series





















































































Search results

Summary of Contents for DS-7300HFI-ST Series

Reviews:

Related manuals for DS-7300HFI-ST Series

Brands by name

Popular brands

HIKVISION DS-7300HFI-ST Series, User Manual

Search results

Summary of Contents for DS-7300HFI-ST Series

Reviews:

Related manuals for DS-7300HFI-ST Series

Brands by name

Popular brands