DS-7108HI-S series Net DVR User Manual
52
Full-Dup, 100M Half-Dup and 100M Full-Dup.
IP server address:
If DVR uses PPPoE function, and get one dynamic IP address. If you set
DNS IP with one fixed Internet IP, DVR will send some information such as DVR name, DVR
serial number, DVR current IP to that fixed IP address. We -call that fixed Internet IP as DNS IP.
The DNS server with that fixed Internet IP can receive DVR information and used to resolve DVR
dynamic IP. This IP server is special software, not normal domain name server. You can use the
provided SDK to develop this DNS software.
Mcast IP:
It is one D-class IP address, among 224.0.0.0 --- 239.255.255.255. If you do not
use multicast function, you do not need to set. Some routers will prohibit multicast function in
case of network storm.
Remote Host IP and Port:
If you set this IP and port, when there is alarm and exception
happened, DVR will send information to that host IP. The center with this IP can receive alarm
and exception information from DVR. You can use SDK to develop this center software.
PPPoE:
DVR support PPPoE dial-up function. As Fig.5.30 shown below:
Fig. 5.30 PPPoE setup
Example: Use PPPoE function
Step 1: Enter “Network”
“Advanced Settings”.
Step 2: Select NIC type.
Step 3: Input port number.
In the port edit box, use numeric keys to input port number. The
port number must be larger than 2000.
Step 4: Input IP Server:
Input one fixed Internet IP address where the IP analyst software
(IP Server) is run.
Step 5: Enter PPPoE Setup & Input PPPoE parameters.
Use [ENTER] or [EDIT] key to
enable PPPoE function (set PPPoE flag as “√”). Input PPPoE username, password and verify
