HIKVISION DS-7100NI-K1/W/M Series User Manual Download Page 17

Page: 17 / 138

Network Video Recorder User Manual

1.1.3 Login and Logout

User Login

You have to log in to the device before operating the menu and other functions.

Steps
1. Select a user account.
2. Enter the password for the selected user.
3. Click Login.

Figure 1-3 Login

●

For the admin, if you have entered the wrong password for 7 times, the account will be
locked for 60 seconds.

●

For the operator, if you have entered the wrong password for 5 times, the account will be
locked for 60 seconds.

User Logout

After logging out, the monitor turns to the live view mode and if you want to perform any
operations, you need to enter user name and password log in again.
Go to Menu → Shutdown. Click Logout.

Figure 1-4 Logout

Summary of Contents for DS-7100NI-K1/W/M Series











































































































































Search results

Summary of Contents for DS-7100NI-K1/W/M Series

Reviews:

Related manuals for DS-7100NI-K1/W/M Series

Brands by name

Popular brands

HIKVISION DS-7100NI-K1/W/M Series, User Manual

Search results

Summary of Contents for DS-7100NI-K1/W/M Series

Reviews:

Related manuals for DS-7100NI-K1/W/M Series

Brands by name

Popular brands